Bf350 Strain Gauge Sensor Module Price in Pakistan

Description

Model: BF350-3AA / 1.5AA
Sensitivity coefficient: 2.0
Strain limit: 2{7e82c6d62784066d1b113f595afb6e15f0ca3fec289cddd29e600df910d44428}
Gate wire: length x width 2×3.5mm
Base dimensions: length x width 5×4.5mm
Base material: modified phenolic substrates.
Gate wire material: constantan
Resistance: 350 Ohm
Fatigue Life:> 10 million times
Flux: ordinary solder rosin
Reverse protection diode ~ (to prevent power reversed)
Board with a blue LED power indicator
Analog Output: The higher the curvature, the greater the output voltage.
Output analog voltage: 0-3.5V
Board size: 32 X 17mm
Behind the printed board pin definitions (Bending strain gauge, you can change the output voltage)
Package Include:
1 x BF350 Strain Gauge Sensor

Note that strain gauges exhibit small changes in resistance and so this sensor should be used in a Wheatstone bridge configuration. If using with a microcontroller such as an Arduino we also recommend using our HX711 digital bridge sensor interface module (see SKU HCMODU0073). sensor with a 350 ohm nominal resistance which varies when a force is applied. By measuring the change in the sensors resistance a measurement of the force applied to it can be obtained. Note that strain gauges exhibit small changes in resistance and so this sensor should be used in a Wheatstone bridge configuration. If using with a microcontroller such as an
Related Products