MPU6050 6DOF Accelerometer Gyroscope Unit – GY-521 Sensor

MPU6050 6DOF Accelerometer Gyroscope
MPU6050 6DOF Accelerometer Gyroscope
MPU6050 6DOF Accelerometer Gyroscope

MPU6050 6DOF Accelerometer Gyroscope Unit – GY-521 Sensor

₨430.00

Delivered All over Pakistan 🇵🇰

The MPU6050 6DOF Accelerometer Gyroscope integrates a 3-axis gyroscope and 3-axis accelerometer. It utilizes the MPU-6050 motion processing chip with an onboard Digital Motion Processor (DMP). The module supports input voltages from 3.3V to 5V via an onboard LDO regulator. Communication occurs through a standard I2C interface compatible with various microcontrollers. Gyroscope full-scale ranges are programmable at ±250, ±500, ±1000, and ±2000 degrees per second. Accelerometer full-scale ranges are user-selectable at ±2g, ±4g, ±8g, and ±16g. It features 16-bit analog-to-digital converters for simultaneous sampling of all axes. The pin pitch is standard 2.54mm for easy breadboarding. This sensor provides precise 6-axis motion tracking data for complex applications

Description

Product Description

Technical Specifications of MPU6050 6DOF Accelerometer Gyroscope

  • Chip: InvenSense MPU-6050 6-axis motion tracking device.

  • Input Voltage: 3V to 5V DC via onboard regulator.

  • Communication: Standard I2C communication protocol.

  • Gyro Range: Selectable ±250, ±500, ±1000, ±2000 dps.

  • Accel Range: Selectable ±2g, ±4g, ±8g, ±16g.

  • ADC: 16-bit resolution for high precision.

  • Pin Spacing: Standard 2.54mm header pitch.

Usage of MPU6050 6DOF Accelerometer Gyroscope

  • Connect VCC to 5V or 3.3V and GND to ground.

  • Wire SCL and SDA pins to the microcontroller’s I2C pins.

  • Use pull-up resistors on I2C lines if not internal.

  • Install the MPU6050 library in your Arduino IDE.

  • Calibrate the MPU6050 6DOF Accelerometer Gyroscope on a flat surface.

  • Read raw values or use DMP for Euler angles.

Advantages 

  • Combines gyro and accelerometer on a single silicon die.

  • Onboard DMP offloads complex processing from the microcontroller.

  • Accurate data output with 16-bit AD converters.

  • Compact size fits easily into small robotics chassis.

  • Wide voltage support simplifies power supply requirements.

  • Compatible with vast community libraries and code examples.

What Not to Do

  • Do not exceed 5V input voltage to avoid damage.

  • Avoid physical shocks or drops that may damage MEMS.

  • Do not connect I2C pins to high-voltage logic levels.

  • Keep the module away from strong magnetic interference.

  • Do not solder pins while the board is powered.

Applications for MPU6050 6DOF Accelerometer Gyroscope

  • Flight control stabilization for quadcopters and drones.

  • Self-balancing robots and inverted pendulum projects.

  • Motion-controlled gaming devices and handheld controllers.

  • Wearable health devices for step and activity tracking.

  • Vibration analysis in industrial monitoring systems.

What’s Included

  • 1 x MPU6050 6DOF Accelerometer Gyroscope Module (GY-521).

  • 1 x Straight Pin Header strip.

  • 1 x Right-Angle Pin Header strip

 

Learn How to use this module: Click Here

Buy Other Components from AmpFlick: Click Here

  • 🔗 Connect with the Ampflick Community

    Stay updated with the latest hardware arrivals, project ideas, and engineering mentorship in Pakistan!

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products